Pulsar Measurement Ultra 3 User Manual

PULSAR MEASUREMENT
91
To program the Ultra 3 for Example 3 BS3680 Weir by using the Quick
Setup menu proceed as follows. If required access the Program Mode, key
in the passcode 1997 and press ENTER.
Using the ‘right’ arrow key, go to the Quick Setup menu press ENTER and
as prompted, by the questions, select the relevant option and press ENTER.
QUESTION
OPTION
PMD Type
3 = 3680 Weir
3680 Weir
1 = Rectangular
Calculation
1 = Absolute
No. of alarms
1 = 1 Alarm
Type alarm 1
1 = High
Alarm No.1
1 = Set to relay 3
Transducer
1 = dB Mach3
Volume units
1 = Litres
Time Units
1 = Second
Measurement units
1 = Metres
Empty level
1.00m
Minimum head
0.00m
Maximum head
0.40m
Totaliser enabled
1 = On
Totaliser (R)
1 = Yes
Totaliser multiplier
7 = 1000
Approach dia. (Dim A)
0.50m
Throat dia. (Dim B)
0.30m
Throat length (Dim C)
0.30m
Programming is now complete, and the unit can now be returned to the run
mode, press CANCEL until Run Mode? Is displayed on the LCD press
ENTER, and the Ultra 3 will return to Run Mode.
Important Notice
If relay setpoints do not meet the exact requirements of the application, they can
be modified to suit by pressing ENTER when, “For More Options Hit Enter”, is
displayed, and entering new values to relay setpoints as required. Alternatively,
access the setpoints by the main menu system or directly accessing the parameters.

Pulsar Measurement Ultra 3 Specifications

General

Brand	Pulsar Measurement
Model	Ultra 3
Category	Measuring Instruments
Language	English