Pulsar ACCOLADE 2 LRF User Manual

Technical Maintenance and
Storage
Maintenance should be carried out no less frequently than twice a year, and should consist of
the following measures:
Wipe the exterior surfaces of metal and plastic parts off dust and dirt with a cotton cloth.
Clean the electric terminals of the Battery Pack and device's battery slot using a grease-
free organic solvent.
Check the objective and eyepieces lenses; rangefinder’s emitter and receiver lenses. If
required, remove dust and sand (preferably by a noncontact method). Clean the external
surfaces of the lenses with products expressly designed for this purpose.
Store the device in a carrying case. Remove the Battery Pack for long-term storage.

Pulsar ACCOLADE 2 LRF Specifications

General

Objective Lens Diameter	50 mm
Detection Range	1800 m
Sensor Resolution	640x480 pixels
Display Type	AMOLED
Pixel Pitch	17 µm
Frame Rate	50 Hz
Laser Rangefinder Range	1000 m
Protection level	IPX7
Dimensions	164x130x64 mm
Waterproof	Yes
Fogproof	Yes
Weight	0.7 kg
Display Resolution	640x480 pixels
Operating Temperature	-25 … +50 °C
Battery Type	Li-Ion Battery Pack