Pulsar Ultra 3 (UL) - Chapter 9 Troubleshooting; Symptom and Solution Guide

Page 178
P975 Start Month
This parameter is used to select the month, in which Daylight Saving Time
will start.
Option
Description
1= January
DST will start during the month of January
2= February
DST will start during the month of February
3=March (Default)
DST will start during the month of March
4= April
DST will start during the month of April
5= May
DST will start during the month of May
6= June
DST will start during the month of June
7= July
DST will start during the month of July
8= August
DST will start during the month of August
9= September
DST will start during the month of September
10= October
DST will start during the month of October
11= November
DST will start during the month of November
12= December
DST will start during the month of December
P976 DST End Time
This parameter is used to set the time of day at which Daylight Saving
Time will end, the time is entered in the format HH: MM (24-hour format).
Default = 02:00.
P977 End Day
Use this parameter to enter the day of the week (P974) that Daylight
Saving Time is to end.
Option
Description
2= Monday
DST will end on a Monday
3= Tuesday
DST will end on a Tuesday
4= Wednesday
DST will end on a Wednesday
5= Thursday
DST will end on a Thursday
6= Friday
DST will end on a Friday
7= Saturday
DST will end on a Saturday
8= Sunday (Default)
DST will end on a Sunday