Pulsar Ultra 3 (UL) - Example 3 Volume Application

Page 41
The Quick Setup Menu detailing the questions you will be asked when
setting up your Level Star, via the Quick Setup is shown below.
Quick Setup Menu
Quick Setup
For Each Alarm
1 = Set to Relay 1
2 = Set to Relay 2
3 = Set to Relay 3
0 = No Control
1 = Control Down
2 = Control Up
No. of Control Relays
1 = 1 Control Relay
2 = 2 Control Relay
3 = 3 Control Relay
For each Cntl. Relay
1 = Set to Relay1
2 = Set to Relay 2
3 = Set to Relay3
How Many Alarm
0=No Alarms
1=One Alarm
2=Two Alarms
3=Three Alarms
List will be truncated
according to the number
of Control relays
selected
For Each Alarm
1=High Alarm
2=Low Alarm
3=Hi Hi Alarm
4=Lo Lo Alarm
5=Loss of Echo
Application
1 = Level
2 = Volume