Enforcer: Programming Manual
Page: 32
Engineer Menu’s Clean Start [2020] Clean Start [2000]
Output 1 Unused [0000] Unused [0000]
User Outputs?
User Output Type Latched [0] Latched [0]
User Output Name _ _
ASSIGN KEYPADS/READERS
Address
Address [0]: Keypad [1]
Addresses [1]-[3]: Unused
[0]
Address [0]: Keypad [1]
Addresses [1]-[3]: Unused
[0]
Set Point Sets [ABCD] [ABCD]
Set Point Unsets [ABCD] [ABCD]
Set Point In [ABCD] [ABCD]
Set Point Description
Enter Name Device 0 Device 0
Enter Location
If programmed as Reader:
Reader Is: Set Point [0] Set Point [0]
If programmed as Reader, Entry
Control or Access Control
Lock Open Time [005]
Door Open Time [010]
Lock Open Time [005]
Door Open Time [010]
CHANGE TIMERS
A, B, C, D: Entry Time [030] [030]
A, B, C, D: Exit Time [020] [020]
A, B, C, D: App Exit Time [030] [030]
A, B, C, D: Siren Time [04] [04]
A, B, C, D: Siren Delay [00] [00]
Confirm Time [30] [30]
HU Confirm Time [08] [08]
Strobe Time [00] [00]
Re-Arm No [3] [3]
AC Signal Delay [040] [040]
Settle [005] [005]
Double Knock [10] [10]
Pre-Alarm [030] [000]
Comm Fault Delay [180] [020]
Set Fail [040] [120]
Fire Siren Time [04] [04]
Set Fail Warning [00] [00]
Input NAT Days [14] [14]
Input NAT Hours [00] [00]
Wireless Supervision Time [02] [24]
Wireless Jamming Time [100] [100]
Service Time [000] [000]
CODES AND USERS
5 Digit PINs No [0] No [0]
Change Duress Codes All codes empty All codes empty
Change Master Manager Code
Master Manager Code 2222 2222
User Areas ABCD ABCD
User Set Options Unset/Set [0] Unset/Set [0]
Flexi Set Yes [1] Yes [1]
User Name _ _
Change Engineer Code 1111 1111
VOLUME CONTROL
A, B, C, D Entry [4] [4]
A,C, D Exit [4] [4]
B Exit [1] [1]
App Exit [4] [4]
Alarm [7] [7]
Fire [7] [7]
Tamper [6] [6]
To Next Page
Loading...
Need help?
General
