Enforcer: Programming Manual
Page: 33
Engineer Menu’s Clean Start [2020] Clean Start [2000]
Day Alarm [6] [6]
Chime [3] [3]
Code Stops Sound Yes [1] Yes [1]
E/E Keypads Only No [0] No [0]
Alert Kps Only Yes [1] Yes [1]
Silent Tech Alert No [0] No [0]
Use Main Sounder Yes [1] Yes [1]
SYSTEM OPTIONS
Site Options
Set With Fault Yes [1] Yes [1]
Set With Tamper+ No [0] Yes [1]
Set with ATS Fault No [0] Yes [1]
Set Fail = Alarm Yes [1] Yes [1]
Do Bat Load Test No [0] No [0]
Strb/Sqwk At Set None [0] None [0]
Use Level Set Yes [1] Yes [1]
Autoset Force No [0] No [0]
Restrict PIN Use Yes [1] No [0]
Simple Set No [0] No [0]
Intelligent Set No [0] No [0]
Common Lobby Yes [1] Yes [1]
Flexi Unset No [0] No [0]
2 Key HU None [3] Both [2]
Tag Opens Doors No [0] No [0]
Fire Key Enable No [0] No [0]
Set with Poll Fault No [0] Yes [1]
Fob Unset Entry No [0] No [0]
Wireless Bell Supervision Yes [1] No [0]
Download if Set No [0] No [0]
UDL/Cloud Priority Low [1] High [0]
System Displays
Area A Text Full Set Full Set
Area B Text Night Set Night Set
Area C Text Area C Area C
Area D Text Area D Area D
Full Area Text Full Full
Sign on Message Enforcer Enforcer
Display When Set No [0] No [0]
Display Alarms No [0] No [0]
Display HUs No [0] No [0]
Display Inputs No [0] No [0]
Exit Modes
A Exit Mode Final Door [1] Timed/Final [2]
B Exit Mode Timed [0] Timed [0]
C Exit Mode Timed [0] Timed [0]
D Exit Mode Timed [0] Timed [0]
REVIEW LOGS
ENGINEER TESTS
DIAGNOSTICS
ENGINEER RESTORE OPTIONS
Engineer Restore Intruder No [0] No [0]
Engineer Restore Hold Up No [0] No [0]
Engineer Restore Tamper Yes [1] Yes [1]
Engineer Restore Soak No [0] No [0]
Engineer Restore Confirmed Yes [1] Yes [1]
Engineer Restore Faults No [0] No [0]
Anti-Code Restore No [0] No [0]
COMMUNICATIONS
App Set UP
To Next Page
Loading...
Need help?
General
