49
ENFORCER V11 PROGRAMMING GUIDE
MENU OPTIONS CLEAN START 2020 CLEAN START 2000
Engineer Restore Conrmed Yes [1] Yes [1]
Engineer Restore Faults No [0] No [0]
Anti-Code Restore No [0] No [0]
COMMUNICATIONS
Select External Modem Type
Modem Type NONE/PSTN [0] NONE/PSTN [0]
App Set Up
Use App No [0] No [0]
System ID Displays unique System ID Displays unique System ID
Cloud Password _ _
Security Level Normal [0] Normal [0]
App Password _ _
Always Poll Cloud No [0] No [0]
Data Network Set Up? 6 6
Programming Signalling
ARC Details [1] [1]
Format Not Used [254] Not Used [254]
Digi Channel 1 Fire [0001] Fire [0001]
Digi Channel 2 HU Device Any [0009] HU Device Any [0009]
Digi Channel 3 Unconrmed Any [0018] Unconrmed Any [0018]
Digi Channel 4 Final Set Any [0022] Final Set Any [0022]
Digi Channel 5 Tamper Any [0007] Tamper Any [0007]
Digi Channel 6 Omit Rearm Any [0017] Omit Rearm Any [0017]
Digi Channel 7 Conrmed Any [0006] Conrmed Any [0006]
Digi Channel 8 Mains Fail [0052] Mains Fail [0052]
Digi Channel 9 Global Fault 2 [0056] Global Fault 2 [0056]
Digi Channel 10 Test ATS [0064] Test ATS [0064]
Digi Channel 11-16 Not Used [0000] Not Used [0000]
User SMS Signalling
SMS Details [1] [1]
Mobile Number _ _
ALARM RESPONSE
Silent 1st Alarm Never [0] Never [0]
Disable Conrm On Entry No [0] No [0]
Area A, B, C, D Starts At Digi [3] Digi [3]
Area A ,B, C, D Stops At Conrm [4] Conrm [4]
Fire, Gas, HU Start At Digi [3] Digi [3]
To Next Page
Loading...
Need help?
General
