38
ENFORCER V11 PROGRAMMING GUIDE
COMMUNICATIONS
COMMUNICATIONS?
Select External Modem Type?
App Set-Up?
Program Wi-Fi?
Program ARC?
Program Digi Channels?
User SMS Signalling?
Advanced Communications?
See the Communications Guide for information regarding the programming of the communications and
signalling.
ALARM RESPONSE
ALARM RESPONSE?
HOW ALARM RESPONSES WORK
This menu is used if the user wants an incremental alarm response to activations.
Activations would start o as a local alarm on the keypad, and progress through a number of stages to signalling
the ARC. Most systems will want a full alarm and signalling immediately. However, on the occasions that isn’t
suitable, this menu can be used.
This works on the activation having an immediate response and every 15 seconds escalating the alarm.
There are 4 stages that the alarm can be raised to:
• Keypads [0]
• Internal Sounders [1]
• Sirens Only [2]
• Signal (Digi)tal Communicator [3]
The immediate response is programmed in the ‘[Area #/Event] starts at’ and the nal response is programmed in
‘[Area #/Event] stops at’. The stages work on a hierarchical system meaning that any stage selected will include
others that are lower in the sequence.
At default, activations and events are programmed to start at ‘Digi [3]’ and stop at
‘Digi [3]’. Due to this stage being the at the top of the hierarchy, when the activation
occurs, the keypads, internal sounders and external bells will all be audible straight
away whilst the system simultaneously signals the event
To Next Page
Loading...
Need help?
General
