6
ENFORCER V11 PROGRAMMING GUIDE
NAVIGATION
h = ‘NO’ - Press to move forward when in Engineer or Master Manager mode.
b = ‘BACK’ - Press to move backward when in Engineer or Master Manger mode.
= ‘YES’ - Press to enter into a sub-menu or option when in Engineer or Master Manger mode.
= Press to move from one option into another option while in a sub-menu.
a = Press to quick exit the Engineer Menu from any main menu (written in capital letters).
c = ‘CANCEL’ - Press to move back from one programmable option to the previous option
MAIN MENUS AND SUBMENUS
SET DATE & TIME?
Year (00-99)
[21]
A Main Menu item is identied by:
• The menu item will be in capital letters
A Sub-menu is identied by:
• The menu item will be in lower case letters
In order to navigate in the menu system, answer the questions in the main and sub menus. For example, if the
question ‘WIRELESS DEVICE CONTROL?’ is displayed, then press or h depending on the answer.
Pressing will enter a sub-menu called ‘Control Inputs?’ in this example. Pressing will enter the
programmable options of this sub-menu. Pressing h will exit the individual option, move up from one sub-
menu to the next sub-menu or back to the main menu.
EXITING THE ENGINEER MENU
When a Main Menu Item (a menu that is in capital letters) is displayed, press or scroll to ‘EXIT ENGINEER
MENU?’ and press .
To Next Page
Loading...
Need help?
General
