Q-See QT SERIES Remote Monitoring Setup Guide

60
PICTURE 4-41
Information
This window contains information about your
DVR and the phone you are using to run the
QT View app.
Device name and Device ID: these are both
set on the DVR and are useful when you are
using QT View to monitor more than one
DVR.
Software Version: This is the version of the
firmware currently installed on the DVR.
Build Date: The date the DVR’s firmware was
released.
Phone Software Version: This shows what
version of QT View you are using.
Build Date: This is the date that your version
of QT View was released.
Help
QT View includes an extensive electronic manual to assist you should you need more help.
Logoff
This allows you to log out of QT View and will return you to the Login screen.

Q-See QT SERIES Specifications

General

Series	QT Series
Video Compression	H.264
Remote Viewing	Yes
HDMI Output	Yes
VGA Output	Yes
Motion Detection	Yes
Channels	4, 8, 16
Recording Resolution	1080p, 720p
Hard Drive Capacity	Up to 6TB
Mobile App Support	Yes
Network Connectivity	Ethernet