Q-See QT SERIES Remote Monitoring Setup Guide

11
1.3 STATIC INTERNAL IP (NETWORK) ADDRESS
Most routers assign connected devices a random IP address that is not currently in use by
another device on your internal network. With the exception of 2Wire brand routers, when
a router or networked device reboots due to a power loss or other issue, the addresses
will change and the port forwarding configuration will no longer work. For that reason, we
recommend changing your DVR’s network setting to a fixed, or “static” IP address which will
not change.
STEP 1. Click on the Setup icon in the
Main Menu.
STEP 2. Click on the Network icon in
the Setup Menu.
STEP 3. Uncheck the box labeled
“Obtain IP Address Automatically.”
STEP 4. Click Apply and then Exit.
NetworkNetwork SubstreamSubstream Other SettingsOther SettingsEmailEmail
NETWORKNETWORK
DefaultDefault
ApplyApply ExitExit
TestTest
HTTP Port
Server Port
Obtain an IP address automatically
IP Address
Subnet Mask
Gateway
Preferred DNS Server
Alternate DNS Server
PPPoE
User Name
Password
HTTP Port
Server Port
Obtain an IP address automatically
IP Address
Subnet Mask
Gateway
Preferred DNS Server
Alternate DNS Server
PPPoE
User Name
Password
80
6036
192 . 168 . 001 . 100
255 . 255 . 255 . 000
192 . 168 . 001 . 001
000 . 000 . 000 . 000
000 . 000 . 000 . 000
80
6036
192 . 168 . 001 . 100
255 . 255 . 255 . 000
192 . 168 . 001 . 001
000 . 000 . 000 . 000
000 . 000 . 000 . 000
PICTURE 1-10
PICTURE 1-11
PICTURE 1-12

Q-See QT SERIES Specifications

General

Brand	Q-See
Model	QT SERIES
Category	DVR
Language	English