Q-See QT SERIES Remote Monitoring Setup Guide

54
4.2 QT VIEW FOR ANDROID SMARTPHONES
The QT View software allows you to remotely monitor your system using your mobile device
and either a wireless or 3G/4G network. You will not be able to change the DVR’s settings
using this application. That will need to be done either in the DVR itself or when remote
monitoring using a computer.
In order to monitor your system using your Android smartphone, you will need to install the
Q-See QT View app for smartphones. The program is available for free through the Android
market by searching for “Q-See.” Install it just as you would any other Android application.
If you are using a tablet, you will need to download the Q-See QT View HD app. These
are two separate programs and the HD version will not work on a smartphone. Please see
Section 4.3, immediately following, for instructions on installing and using Q-See QT View
HD on your tablet.
PICTURE 4-29
Q-See QT View
DPSI
Free
Q-See QT View HD
DPSI
Free
For smartphones:
For tablets:
To launch QT View, simply tap on its icon in the app menu on your device.
NOTE! Although the software needed to access your DVR is free, you will
need to have or create an account with the Android Market to proceed.

Q-See QT SERIES Specifications

General

Series	QT Series
Video Compression	H.264
Remote Viewing	Yes
HDMI Output	Yes
VGA Output	Yes
Motion Detection	Yes
Channels	4, 8, 16
Recording Resolution	1080p, 720p
Hard Drive Capacity	Up to 6TB
Mobile App Support	Yes
Network Connectivity	Ethernet