38
The Email tab, located in the Network menu, allows you to set how your DVR will send out
e-mail alerts. You will be able to send e-mail alerts to three addresses.
NetworkNetwork SubstreamSubstream
NETWORKNETWORK
DefaultDefault
ApplyApply ExitExit
TestTest
SMTP Server
Port
SSL Check
Send Address
Password
Receive Address1
Receive Address2
Receive Address3
Advanced
Attach Image
SMTP Server
Port
SSL Check
Send Address
Password
Receive Address1
Receive Address2
Receive Address3
Advanced
Attach Image
EmailEmail Other SettingsOther Settings
465465
NOTE! Depending upon your settings, the system can generate a lot of e-mail
alerts. For that reason, we recommend setting up a dedicated e-mail address
specifically for the system to send alert notices. If you do not have your own
e-mail system (such as a corporate mail server) you should consider using a
free e-mail provider. However, because many free e-mail services allow only
a limited amount of e-mail traffic we specifically recommend using Google’s
Gmail service with its higher limit. Similarly, you will want the alert e-mails to go to a different
account than the one sending them. This will ease your management of these alerts and
prevent your mailbox from overflowing.
If you do not have your own e-mail system, please set up a free account which the DVR can
use to send out alerts before proceeding.
For the example below, we will use Gmail. The settings can be found under Options when
logged into your Gmail account.
Clicking on any of the fields will bring up the virtual keyboard allowing you to enter the data.
The virtual keyboard is capable of handling upper and lower case letters as well as numbers
and symbols. Click the ENTER button to enter your input or ESC to exit the field without
applying any changes.
SMTP Server: smtp.gmail.com
Port: 465 (standard port for Gmail - others
may vary)
SSL Check: You will need to select this for
Gmail. Other ISPs may vary.
Send Address: Enter your new address. This
will appear on alert e-mails sent from
the DVR
Password: Enter the password you created
for this account. Remember, it will be
case-sensitive.
Receive Addresses: You may set up to three
e-mail addresses to receive alerts. It
is strongly advised that you do not
use the same address that the DVR is
using to send alerts.
Advanced
Attach Image: Select whether the DVR will
send images along with the alert.
The alert e-mails can include up to
three images. The number of images
can be set in the Snap tab of the
Recording menu.
PICTURE 3-1
PICTURE 3-2
E-MAIL NOTIFICATION SETUP
EnableEnable SnapSnapRecord BitrateRecord Bitrate Recycle RecordRecycle RecordTimeTime StampStamp
RECORDRECORD
DefaultDefault
ApplyApply ExitExit
Resolution
Quality
Snap Time Interval [S]
Snap Number
Resolution
Quality
Snap Time Interval [S]
Snap Number
CIFCIF
MediumMedium
22
11
To Next Page
Loading...
Need help?
General
