Qualigen FastPack IP System - Welcome; What the Fastpack IP System Does; About this Manual

65000159 Rev. 008 (06/17) 1
Welcome
The FastPack
®
IP System provides lab-quality immunoassay performance in a design ideal for the
physician’s office or small laboratory. The small system utilizes advanced technology to provide an
immediate result, yet it is very simple to use.
The FastPack
®
IP System includes the FastPack
®
IP Analyzer and External Printer. The FastPack
®
IP
System requires a disposable single-use FastPack
®
IP for each test. The operator simply loads the sample
into the FastPack
®
IP, places the FastPack
®
IP in the Analyzer, and presses the start button. When the test
is complete, the Analyzer displays the result.
The FastPack
®
IP System is for in vitro diagnostic use only.
This manual contains all of the information needed to operate and care for the FastPack
®
IP System.
Please read this entire manual before you begin operation.
For information on the performance of FastPack
®
IP tests, please refer to the current direction insert
posted on the Qualigen, Inc. website at www.qualigeninc.com.
If you have questions or concerns about the FastPack
®
IP System, please contact your local distributor or
call Qualigen, Inc. Toll Free: 1-877-770-6127.
What the FastPack
®
IP System Does
The FastPack
®
IP System performs immunoassays on serum and plasma samples. Refer to the Principle of
Operation for a detailed description.
Immunoassay tests help physicians diagnose and monitor a range of disease states.
About This Manual
Action
Instrument
Information
Illustration
This column represents
your action.
This column shows what
the analyzer displays.
This column provides
additional information
about the action.
Press the BLUE button.
“Ready”
This is the “Ready Mode”
of the instrument, i.e., the
analyzer is ready to
perform a test.