Qualigen FastPack IP System - Testing an Hcg 1;10000 Diluted Sample in Dilution Mode

65000159 Rev. 008 (06/17) 35
Testing in Dilution Mode
Testing an hCG 1/100 Diluted Sample in Dilution Mode - Continued
Action
Instrument
Information
Illustration
Press the RED button.
“Red=1/ 100
Blue=1/10000.0”
This prompt is asking for
the dilution factor of the
sample.
Press the RED button.
“Dil=1/ 100
Red=STOP,Blue=GO”
This prompt is asking for
confirmation.
Press the BLUE button.
“Processing…
11 min. remain”
The test is initiated.
Testing an hCG 1/10000 Diluted Sample in Dilution Mode
To learn more about hCG sample dilution, go to www.qualigeninc.com/hcgdilution.
Insert the sample filled
FastPack® IP into the
analyzer.
NOTE: In this scenario, the
sample will have been
diluted 1/10000 prior to
filling into the FastPack®.