Qualigen FastPack IP System - Page 46

36 65000159 Rev. 008 (06/17)
Testing in Dilution Mode
Testing an hCG 1/10000 Diluted Sample in Dilution Mode - Continued
Action
Instrument
Information
Illustration
Press the BLUE button.
“Sample Dilution?
Red=Yes, Blue=No”
This prompt is questioning
whether or not the current
test sample is diluted.
To test a diluted sample,
respond with “Yes”. A “No”
response indicates a neat
sample is to be tested.
Press the RED button.
“Red=1/ 100
Blue=1/10000.0”
This prompt is asking for
the dilution factor of the
sample.
Press the BLUE button.
“Dil=1/10000.0
Red=STOP, Blue=GO”
This prompt is asking for
confirmation.
Press the BLUE button.
“Processing…
11 min. remain”
The test is initiated.