Qualigen FastPack IP System - Testing an Hcg 1;100 Diluted Sample in Dilution Mode

34 65000159 Rev. 008 (06/17)
Testing in Dilution Mode
Testing a Neat Sample in Dilution Mode - Continued
Action
Instrument
Information
Illustration
Press the BLUE button.
“NO Dilution Used
Red=STOP, Blue=GO”
This prompt is asking for
confirmation that you are
testing a neat sample.
Press the BLUE button.
“Processing…
11 min. remain”
The test is initiated.
Testing an hCG 1/100 Diluted Sample in Dilution Mode
To learn more about hCG sample dilution, go to www.qualigeninc.com/hcgdilution.
Insert the sample filled
FastPack® IP into the
analyzer.
NOTE: In this scenario, the
sample will have been
diluted 1/100 prior to
filling into the FastPack®.
Press the BLUE button.
“Sample Dilution?
Red=Yes, Blue=No”
This prompt is questioning
whether or not the current
test sample is diluted.
To test a diluted sample,
respond with “Yes”. A “No”
response indicates a neat
sample is to be tested.