Qualigen FastPack IP System - Analyzer Software Upgrade Using Smart Media Card

65000159 Rev. 008 (06/17) 63
Analyzer Software Upgrade Using Smart Media Card
What You Need
1. FastPack
®
IP System analyzer
2. Smart Media Card
Action
Instrument
Information
Illustration
With the analyzer on and
in “Ready” mode, insert
the Smart Media Card into
the port on the back of the
analyzer labeled “SMART
MEDIA CARD”.
“Ready”
The gold side of the Smart
Media Card should face up.
The notch on the Smart
Media Card will be
inserted first.
Scroll to “Upgrade
Software” by pressing the
RED button on the
analyzer.
“Upgrade Software”
Press the BLUE button to
select the “Upgrade
Software” menu option.
“Checking…”
The unit will start by
checking the software and
finish by going through
Self-Diagnostics. The entire
sequence should take
about 2 minutes. If the
analyzer should get stuck
at any step, call Qualigen
System Support.
If an error message is
displayed, DO NOT turn off
the machine. Follow the
instructions on the display.
If the error persists, call
Qualigen System Support.
①
②