Qualigen FastPack IP System - Page 74

64 65000159 Rev. 008 (06/17)
Upgrade Procedure
Action
Instrument
Information
Illustration
When the analyzer returns
to “Ready” mode, press
the EJECT button next to
the port and remove the
Smart Media Card.
Return the Smart Media
Card after the upgrade is
complete.
“Ready”
After the software is
completely installed,
“Software VX.XX” appears
in the display and the self-
diagnostics will run
automatically. Once the
diagnostics are complete,
“Ready” will appear on the
screen. It is acceptable to
remove the card at this
time.