Qualigen FastPack IP System - Testing with the Fastpack IP System in Dilution Mode; Testing a Neat Sample in Dilution Mode

65000159 Rev. 008 (06/17) 33
Setting Dilution Mode
Action
Instrument
Information
Illustration
“Ready”
The analyzer display will
return to the “Ready”
screen
Testing with the FastPack
®
IP System in Dilution Mode
Testing in Dilution Mode
Testing a Neat Sample in Dilution Mode
Action
Instrument
Information
Illustration
Insert the sample filled
FastPack® IP into the
analyzer.
Press the BLUE button.
“Sample Dilution?
Red=Yes, Blue=No”
This prompt is questioning
whether or not the current
test sample is diluted.
To test a neat sample,
respond with “No”. A “Yes”
response indicates test
sample is diluted.