Qualigen FastPack IP System - Page 55

65000159 Rev. 008 (06/17) 45
Sample Collection and Delivery – Vitamin D Only
Action
Instrument
Information
Illustration
Follow steps 6 through 9
from your FastSteps for
Vitamin D Guide.
When testing for Vitamin
D, it is necessary to treat
each sample with pre-
treatment buffer prior to
putting the sample into the
FastPack
®
IP
Closely follow steps 10
through 13 from your
FastSteps for Vitamin D
Guide.
Use serum, plasma,
calibrators or controls
only.
Always wear gloves when
handling samples.
It is very important that
the pipette tip is firmly
placed in the injection
port. If any sample leaking
is detected, immediately
dispose of the FastPack
®
IP
and begin again with a new
FastPack
®
IP and sample