Quasar CP-3211 User Manual

Quasar CP-3211/CP-4221 User and Installation Guide
126
WDR
The Wide Dynamic Range (WDR) function resolves high contrast or changing light issues in order to
enhance the video display. From the drop-down list, select On or Off. Click Set to confirm the setting.
Auto Calibration
Auto Calibration automatically calibrates the camera when a deviation of dome pivot is detected.
The camera constantly aligns itself against vertical and horizontal checkpoints to maintain accurate
operation. From the drop-down list, select On or Off. Click Set to save the setting.
Noise Reduction
The Noise Reduction function analyzes pixel by pixel and frame by frame to eliminate environmental
noise and deliver optimized image quality, especially in low-light conditions. From the drop-down
list, select On or Off. Click Set to confirm the setting.
OSD
Enable the OSD (On-Screen Display) function to display the camera tilt, angle, and zoom ratio
settings in the Live View pane. From the drop-down list, select On or Off. Click Set to save the
setting.
Set Pan Zero
Set the current camera position as the Pan Zero (due north) point for the camera. Click Set to save
the setting.
TV System
Select the video format that matches your TV system:
 30 fps (NTSC)
 25 fps (PAL)
Click Set to confirm the setting.
Zoom
Select Wide or Tele. Then drag the cursor on the Zoom bar to set the zoom level, which is displayed
in the window (x1..x18 on CP-3211-xxx or x1..x20 on CP-4221-xxx).
Focus
Select one of the following settings: Auto, Manual, Near, or Far.

Quasar CP-3211 Specifications

General

Brand	Quasar
Model	CP-3211
Category	Security Camera
Language	English