Quasar CP-3211/CP-4221 User and Installation Guide
76
o Overwrite
The original image in the FTP site will be overwritten by the new uploaded file with a
static filename.
After entering all the settings, click Save.
7.3.9 Motion Detection
The motion detection function detects suspicious motion and triggers alarms when motion volume
in the detected area reaches/exceeds the determined sensitivity threshold value.
Figure 59: Motion Detection Screen
Within the Live View pane on the Motion Detection screen, there is a frame (Motion Detection
window) which is used for defining the motion detection area. To change the size of the Motion
Detection window, move the mouse cursor to the edge of the frame and drag it outward/inward.
Moving the mouse to the center of the frame shifts the frame to the intended location.
Motion Detection Activation
It is possible to define up to four motion detection zones within the Motion Detection window by
selecting a number from the drop-down menu.
The motion detection function may be turned on or off in the Motion Detection section of the
screen. The default setting is Off. Alternatively, you may select By schedule to set a schedule.
To Next Page
Loading...
Need help?
General