Quasar CP-3211 User Manual

Quasar CP-3211/CP-4221 User and Installation Guide
72
Triggered Action
The Administrator can specify various alarm actions to be taken when an alarm is triggered. The
options are listed below.
 Enable Alarm Output 1/Enable Alarm Output 2 – Select these boxes to enable alarm relay
outputs.
 Record stream to sd card – Select this box in order to save the alarm-triggered recording into
a microSD/SDHC card. Enter the number of seconds for the pre-trigger buffer. Select the first
radial button to upload for a specified length of time and enter the number of seconds.
Alternatively, select the second radial button to upload during the active trigger.
Figure 54: Application – Record Stream to SD Card
Note:
Make sure the local recording (with a microSD/SDHC card) is activated so that
this function can be implemented. See Recording for further details.
 Send Alarm Message by FTP/E-Mail – The Administrator can select whether to send an alarm
message by FTP and/or e-mail when tampering is detected.

Quasar CP-3211 Specifications

General

Brand	Quasar
Model	CP-3211
Category	Security Camera
Language	English