Quasar CP-3211 - Internet Security Settings

Quasar CP-3211/CP-4221 User and Installation Guide
140
A.3. Internet Security Settings
If ActiveX control installation is blocked, either set Internet security level to default or change
ActiveX controls and plug-in settings.
To set the default Internet security level:
1. Start Internet Explorer.
2. From the Command Bar toolbar, select Tools and select Internet Options from the menu
that appears.
Figure 118: Command Bar Toolbar – Select Internet Options
3. In the Internet Options window that appears, select the Security tab.
4. Select in Select a zone to view or change security settings.
5. If the settings are not defined as default, select Default Level and move the Allowed
levels for this zone slider to Medium-high and select OK.
Figure 119: Internet Options Screen
6. Close all browsers and reopen so that the settings take effect.