Quasar CP-3211 User Manual

Quasar CP-3211/CP-4221 User and Installation Guide
138
7. Right-click and select Browse to directly access the camera via a web browser. The default
web browser opens and requests access to the camera IP address.
Figure 115: Device Search Application – Select Browse
8. When the web browser contacts the camera IP, do the following:
Log in using the default user name Admin and password 1234.
Note:
ID and password are case-sensitive.
Note:
It is strongly advised that administrator’s password be altered for
security reasons.
If the Information Bar (just below the URL bar) prompts for permission to install the
ActiveX Control for displaying video in the browser (see the figure below), right-click
on the Information Bar. Select Install ActiveX Control to allow the installation.
Figure 116: Device Search Application – Select Install ActiveX Control

Quasar CP-3211 Specifications

General

Brand	Quasar
Model	CP-3211
Category	Security Camera
Language	English