RadioLink Crossflight User Manual

Radiolink Electronic Ltd
www.radiolink.com
23
3．Setup Flight Mode 1 is Stabilize both in Mission Planner and transmitter.
Make sure the -swt- is ON (by press the 3 Posi-SW or 2 Posi-SW to make it ON or OFF) and then you
can setup the PWM data.
Setup the PWM value according to the default numerical interval (change the value by turn the dial, press
the Push button when you choose the right value.

RadioLink Crossflight Specifications

General

Brand	RadioLink
Model	Crossflight
Category	Controller
Language	English