RadioLink Crossflight User Manual

Radiolink Electronic Ltd
www.radiolink.com
34
Make sure transmitter and receiver connect success and work with SBUS signal.
F/S setting steps:
Setup in transmitter: setup the throttle trim to -120 by trim switch and then press Mode button one second into
BASIC MENU, choose and into F/S menu, put the throttle stick to the bottom to setup 3: THRO 3%. Please
setup the throttle trim back to 0 after setup the THRO 3% success.

RadioLink Crossflight Specifications

General

Brand	RadioLink
Model	Crossflight
Category	Controller
Language	English