RADWAG PS Series User Manual

57
• in order to select one of the options, e.g. 20 pcs press ENTER/PRINT key
and as the display indicates value “20” proceed as shown on below figure
• If option FrEE (sample quantity is declared by a user) is selected, insert
sample quantity used for determining mass of single part
Press
key to select a digit to be altered,

RADWAG PS Series Specifications

General

Category	Scales
Brand	RADWAG
Series	PS
Capacity	Varies by model
Readability	Varies by model
Pan Size	Varies by model
Display	LCD
Housing	Plastic
Repeatability	Varies by model
Linearity	Varies by model
Calibration	Internal or external
Interface	RS232
Power Supply	100 - 240V AC
Operating Temperature	+15 ÷ +30 °C
Weighing Unit	g, lb, oz