Rain Bird IQ - IQ-NCC Configuration - Direct Satellite Setup Wizard; Selecting Satellite Type; Setting Satellite Address; Selecting Satellite IQ Port

20
IQ Network Communication Cartridge
IQ-NCC Configuration
This section provides the steps
required to congure an IQ-NCC for
communication with the IQ computer.
Follow the same steps for each type of
IQ-NCC, any dierences are addressed
in the specic step.
Direct Satellite Setup Wizard
Follow these steps to congure a
Direct Satellite:
g
Turn the controller dial to
ETM/IQ SETTINGS.
A
The IQ Settings main menu is
displayed. Use the UP or DOWN
arrows to select Setup Wizard;
press Next.
NCC Configurator
B
The Setup - Satellite Type screen
is displayed. Use + or - to select
Direct; press Next.
C
The Setup – Satellite Address
screen is displayed. Direct
Satellites always have an address
of 001; press Next.
Direct
D
The Setup – Satellite IQ Port
screen is displayed; press Next.
l
For RS Only: use + or - to choose
an IQ Port option, then press Next.