SIM Card Installation
The GPRS/Cellular Network Communication Cartridge (IQ-
NCC-GP) requires a SIM card to establish a connection with
a public static IP address.
b
NOTE: An IP address must be obtained from AT&T
or another GSM/GPRS service provider, and must be
purchased separately.
Follow these steps to install a SIM card in the NCC-GP:
A
On the front of the NCC-GP, remove the T-shaped
access plate by pressing down on the tab.
1
B
Orient the SIM card to match the image of the SIM card
as displayed molded on the cartridge (with the “cut-
corner” on top and to left as shown).
C
Install the SIM card in the slot.
3
2
D
Replace the access plate.
To Next Page
Loading...
