Rain Master RME EAGLE - Page 118

Rain Master Irrigation Systems RME EAGLE User Manual
Appendix A Controller Displays Page 111
A APPENDIX – CONTROLLER DISPLAYS
A.1 MESSAGE AND PROMPT DISPLAY
A.1.1 HELLO Mode
= “HELLO” will be displayed when the controller is powered up
for the first time. When HELLO is displayed the controller
has NO user irrigation programs stored.
NOTE: After 6 hours in the HELLO mode the
controller will begin to water every station for
10 minutes. The 10-minute watering cycle per
station will repeat every 24 hours.
Hitting any key exits HELLO mode, and
removes the default watering program.
A.1.2 Automatic Mode Display
= Display time-of-day for 5 seconds.
The display will then alternate to,
= Display Date for 5 seconds and then repeat the cycle
continuously.
A.1.3 ET Prompts and Displays
= Display yesterday’s Historical ET value, this value will be
used in today’s irrigation programs calculations.
= Display yesterday’s Internet ET value, this value will be used
in today’s irrigation programs calculations.
= Display yesterday’s Weather Station Device ET value, this
value will be used in today’s irrigation programs calculations.
HELLO
PROGRAM
3:13 PM
PROGRAM
11/23/02
PROGRAM
ET-H .28
PROGRAM
ET-I .28
PROGRAM
ET-D .28
PROGRAM