Rain Master RME EAGLE - A.1.11 SETUP Prompts and Displays

RME EAGLE User Manual Rain Master Irrigation Systems
Page 112 Appendix A Controller Displays
= Display yesterday’s manually entered ET value; this value will
be used in today’s irrigation programs calculations. This
display is also presented when a manual ET value is to be
entered.
= Enable/Disable the ET program mode, on a per program basis.
= Display and enter the Historical ET Reference value. The
value is used in all subsequent irrigation calculations.
= Display or enter the Historical ET month of January value.
The value is used in all subsequent irrigation calculations.
= Display or enter the Historical ET month of February value.
The value is used in all subsequent irrigation calculations.
= Display or enter the Historical ET month of March value. The
value is used in all subsequent irrigation calculations.
= Display or enter the Historical ET month of April value. The
value is used in all subsequent irrigation calculations.
= Display or enter the Historical ET month of May value. The
value is used in all subsequent irrigation calculations.
= Display or enter the Historical ET month of June value. The
value is used in all subsequent irrigation calculations.
= Display or enter the Historical ET month of July value. The
value is used in all subsequent irrigation calculations.
ET-M .28
PROGRAM
ET 1234
PROGRAM
ETREF .10
PROGRAM
ETJAN .23
PROGRAM
ETFEb .13
PROGRAM
ETMAR .14
PROGRAM
ETAPR .18
PROGRAM
ETMAY .21
PROGR
A
M
ETJUN .17
PROGRAM
ETJUL .33
PROGRAM