Rain Master RME EAGLE - Page 152

Rain Master Irrigation Systems RME EAGLE User Manual
Appendix C Programming Examples Page 145
EXAMPLE: Enable the Flow Sensor,
Continue to Press: Until display indicates:
Press:
Display will indicate:
Press: Until display indicates:
Press:
Display will indicate:
The Flow Sensor has been enabled for a pipe size of 2 inches and is
applicable to all irrigation programs.
Irrigation programs one (1), two (2), and three (3) use approximately 104
gallons-per-minute when running simultaneously (See Table 12- Water Demand).
To provide Main Line break notification, we will set the Main Line Flow Limit
to 125 GPM. This is the approximate sum of the three stations operating
simultaneously, plus a 20 percentage water fluctuation allowance.
Press: Until display indicates:
1
SUN
FLOW
PROGRAM
SETUP
FLOW ON
PROGRAM
ENTER
1
SUN
PIPE 1.50
PROGRAM
SETUP
PIPE 2.00
PROGRAM
ENTER
MAIN 500
PROGRAM
SETUP