RME EAGLE User Manual Rain Master Irrigation Systems
Page 76 Chapter 6 Setup Key Operations
6.13.2 Main Line Flow Limit
This feature allows you to program the Main Line Upper Flow Limit. This is the maximum water
flow that the controller will allow whenever any station is on. If the controller has been setup for
NO STACK operation, multiple stations may be on at the same time. The main line limit should be
larger than the sum of the flow totals of all simultaneously "on" stations.
NOTE: This SETUP function will be skipped if you have not enabled the flow
features.
EXAMPLE: Program a Main Line Flow limit of 400 GPM.
Continue to Press: Until display indicates:
Press:
Display will indicate:
Press:
The controller will return to the Automatic Mode.
MAIN 400
PROGRAM
SETUP
MAIN
PROGR
M
ENTER
QUIT
4
To Next Page
Loading...
