Rain Master RME EAGLE - 6.13.6 Flow Percentage

Rain Master Irrigation Systems RME EAGLE User Manual
Chapter 6 Setup Key Operations Page 79
Press:
Display will indicate:
Press:
The controller will return to the Automatic Mode.
NOTE: If you hit SETUP while the words TOTAL..GALLONS are on the display
you will miss this SETUP feature because the controller will go to the next
SETUP feature.
Then at the end of the month:
Continue to Press: Until display indicates:
This is the total gallons of water used for the month.
Press:
The controller will return to the Automatic Mode.
NOTE: The Totalizer will reset to zero (0) after displaying 9,999,999 gallons.
6.13.6 Flow Percentage
The Flow Percentage feature can be used to globally establish station flow upper limits. The flow
percentage can be set from 5 to 80 percent. This feature can be used in two ways:
1. Assume limits need to be established for a new system and you wish to have all station flow
limits to be 15 percent above their nominal value.
0
PROGRAM
CLEAR
QUIT
SETUP
TOTAL
PROGRAM
QUIT
GALLONS
PROGRAM
252567
PROGRAM