Instrument Tour
R&S
®
SMW200A
46Getting Started 1412.9220.02 ─ 21
NOTICE! Risk of damaging the HS DIG I/Q interface.
Use active optical QSFP+ cable with max. power class 2 module (2.0 W max.
power consumption).
●
To plug in the cable:
Hold the QSFP+ plug by its panes. The release tab must be upwards
oriented.
Insert it in the HS DIG I/Q cage and push it.
●
To disconnect the cable:
Do not pull the cable itself. Puling the cable can damage the cable
and the HS DIG I/Q connector.
Pull the release tab and pull the connector out of the HS DIG I/Q con-
nector.
See also "I/Q Digital Output Settings" and "Digital Baseband Input Settings" in the
user manual.
Rear Panel Tour
To Next Page
Loading...
