R&S SMW200A - Page 49

Trying Out the Instrument
R&S
®
SMW200A
49Getting Started 1412.9220.02 ─ 21
Figure 6-1: Block diagram: Generating an unmodulated signal
Tip: Alternative way to access the instrument functions. To fulfill the same
task, you can use other hot spots in the block diagram, the provided functions
under the "RF" block or the function front panel keys.
Try out the following:
● On the "Status Bar" and in the block diagram, tap the underlined labels ,
and .
Or:
● Select "Block Diagram > RF A" block, navigate through the context menu,
and use the settings provided in the "Frequency" and "Level" dialog.
Generating an Unmodulated Carrier