Trying Out the Instrument
R&S
®
SMW200A
69Getting Started 1412.9220.02 ─ 21
The "Power Spectrum" displays two signals, both 3GPP FDD signals are fre-
quency shifted and the right one is also attenuated.
5. To retrieve more information, zoom in the spectrum and select "Show Marker"
to measure the distance between the two signals.
In principle, the zoom in function works like the two-finger pinching for magni-
fying images on your cell phone.
6. In the "Power Spectrum" dialog, select "Configure" to return to the "Graphics
Configuration" dialog.
Close the "Graphics Configuration" dialog.
This action has no effect on the configured graphics but on the dialog itself.
The block diagram displays the current signal routing. It indicates that fre-
quency and power offsets are enabled and displays the acquisition points for
the real-time diagrams minimized in the "Taskbar".
Verifying the Generated Signal with the Graphics Display
To Next Page
Loading...
