Trying Out the Instrument
R&S
®
SMW200A
71Getting Started 1412.9220.02 ─ 21
3. Tap the "Save" button.
The file MyTestSignal.savrcltxt is saved in the default directory /var/
user.
To load saved instrument settings
You can restore the settings to the instrument at any time using the settings file.
1. Press the [PRESET] button to restore the default instrument settings so you
can check that the saved user settings are restored afterwards.
2. Press the [SAVE/RCL] key.
3. In the "Save/Recall" dialog, select "Recall" operation.
Navigate to the directory the file is saved in and select the MyTestSignal
file.
Saving and Recalling Settings
To Next Page
Loading...
