Rapid Shape P20+ User Manual

General Information
Rapid Shape Operating Instructions
DOCR000225
Page 9 / 37
Digital workflow (schematic representation):
These operating instructions detail the process up to stage 3 and 4. Stage 1, 2, 5 and 6 as well as the
photosensitive print materials for stage 4 are not covered by the delivery scope of the 3D printing system, but
can all be acquired from Rapid Shape or its partners. Should you have any queries, please contact our sales
team.
2.4 Duties - operator (the operating company)/ person working on the machine
(machine operator)
It is essential to observe the instructions given in these operating instructions
- It is essential to observe the fundamental safety instructions in order to assure perfect as
well as safe operation of the machine.
- These operating instructions contain all the important information required for a safe
operation of the machine.
- All persons that operate/work on this machine must have read and understood these
operating instructions.
Responsibility of the operator (the operating company)
The operating company is obliged to
- to instruct the person working on the machine in its operation.
- inform the person working on the machine about safety in the workplace as well as the
generally applicable accident prevention regulations.
- to provide the person working on the machine with the operating instructions.
- A brief cleaning of the machine must be undertaken after every printing operation. See
Chapter 8.
Responsibility of the person working on the machine (the machine operator)
Persons who operate this machine are obliged to
- observe safety in the workplace as well as the generally applicable accident prevention
regulations.
- to observe and follow the instructions and safety information given in these operating
instructions.
We accept no liability for machine damage or injury to the operating personnel if these operating instructions
are not observed.
1) Generation of
the 3D data
2) Processing of
the 3D data
(optional)
3) Preparation of
the 3D data for the
printer system
4) Print of the 3
dimensional
component
5) Post-processing
6) Use of the
component

Rapid Shape P20+ Specifications

General

Brand	Rapid Shape
Model	P20+
Category	3D Printers
Language	English