Spreading operation with the QUANTRON-A control unit 5
94
5.6 Spreading in the MAN scale operating mode
The MAN scale operating mode enables manual adjustment of the metering slide
opening during the spreading operation.
Precondition:
The metering slides are open (activation with the Start/Stop key).
In the MAN scale operating screen, the icons for sections are filled in red.
Figure 5.4: MAN scale operating screen
[1] Display of current metering slider scale position
11. To change the dosing slide opening, press the F2 or F3 function key.
F2: MAN+ to increase the metering slide opening or
F3: MAN- to reduce the metering slide opening.
NOTICE
In order to achieve an optimum spreading result in manual mode as well, it is
recommended to apply the metering slide opening and forward speed values
provided in the fertiliser chart.
To Next Page
Loading...