Rauch QUANTRON-A AXIS-M 20 Q - Application Rate; Working Width

Operation QUANTRON-A 4
42
4.6.1 Application rate
In this menu, you can enter the desired target value for the application rate.
Entering the application rate:
1. Open the Fertiliser settings > Appl. rate (kg/ha) menu.
 The currently applied application rate is displayed.
2. Enter the new value in the input field.
See chapter 4.13.2: Entering values with the cursor keys, page 84
.
3. Press the Enter key.
 The new value is saved in the control unit.
4.6.2 Working width
You can set the working width (in meters) in this menu.
1. Open the Fertiliser settings > Working width (m) menu.
 The currently applied working width is displayed.
2. Enter the new value in the input field.
See chapter 4.13.2: Entering values with the cursor keys, page 84
.
3. Press the Enter key.
 The new value is saved in the control unit.