Operation QUANTRON-A 4
54
4.7 Machine settings
In this menu, the tractor and machine settings can be configured.
Open the Machine settings menu.
Figure 4.14: Machine settings menu (example)
NOTICE
The Machine menu. The Fertiliser settings menu is different for the fertiliser
spreader AXIS and MDS.
Sub-menu Meaning Description
Tractor (km/h) Determining or calibrating the speed sig-
nal.
Page 55
AUTO / MAN mode Determining the automatic or manual
operating mode.
Page 58
+/- appl. rate Pre-setting the quantity reduction for the
different spreading types.
Page 61
Signal for empty run
measurement
AXIS-M EMC only: Activation of the sig-
nal tone when starting the automatic
empty run measurement
kg level sensor Entering the residual quantity to trigger
an alarm message via the weigh cells.
Easy toggle For AXIS only: Restricts the L%/R%
toggle key to two conditions
Page 62
Application corr. L/R
(%)
Correction of the deviations between the
entered application rate and the actual
application rate.
Correction in percent either on the
right or left side
To Next Page
Loading...