Rauch QUANTRON-A AXIS-M 20 Q - Stopping the Recording; Deleting Field Data

Operation QUANTRON-A 4
68
4.9.3 Stopping the recording
1. Open the 1st page of the active field data in the Field data menu.
2. Press the F2 function key below the stop symbol.
 The recording is stopped.
4.9.4 Deleting field data
The control unit QUANTRON-A facilitates the deletion of recorded field data.
Deleting field data
1. Call up the Field data menu.
2. Select field data from the list.
3. Press the F3 function key below the Delete icon (see Figure 4.20
).
 The selected field data has been deleted.
Deleting all field data
1. Call up the Field data menu.
2. Press the F2 function key below the Delete all icon (see Figure 4.20
).
 A message appears indicating that all data will be deleted (see 6.1: Alarm
message meanings, page 99).
3. Press the Start/Stop key.
 All field data are deleted.
NOTICE
Only the content of the field data will be deleted, the field data name will still be
displayed in the name field!