Operation QUANTRON-A 4
34
4.3.2 Displaying the remaining quantity
In the Rest (kg, ha, m) menu, you can request or input the residual quantity
within the hopper.
The menu shows the possible area (ha) and distance (m) which can still be
spread using the remaining fertiliser quantity. Both displays are calculated based
on the following values:
Fertiliser settings,
Entry in the residual quantity input field,
Application rate,
working width.
Figure 4.4: Rest (kg, ha, m) menu
[1] Residual quantity input field
[2] Application rate (display field from fertiliser settings)
[3] Working width (display field from fertiliser settings)
[4] Display of possible area which can be spread with the residual quantity
[5] Display of possible distance which can be spread with the residual quantity
NOTICE
For Weighing spreaders the current loading weight can only be determined by
weighing.
For all other spreaders, the residual fertiliser quantity is calculated from the fer-
tiliser and machine settings as well as from the drive signal, and the filling quan-
tity has to be entered manually (see below).
The values for Application rate and Working width cannot be changed in this
menu. They are for information purposes only.
1
2
4
5
3
To Next Page
Loading...