Rauch QUANTRON-A AXIS-M 20 Q - Display Configuration

Operation QUANTRON-A 4
72
4.10.2 Display configuration
The display fields in the operating screen of the control unit can be configured as
desired. You can assign the three display fields with the following values if de-
sired:
 Forward speed
 Flow factor (FF)
 Time
 ha trip
 kg trip
 m trip
 residual kg
 m rest
 residual ha
 Idle time
Figure 4.25: Display configuration menu
[1] Display field 1
[2] Display field 2
[3] Display field 3
Select display
1. Open the System/Test > Display configuration menu.
2. Select the required display field.
3. Press the Enter key.
 The available options are displayed in a list.
4. Select the new value to be assigned to the display field.
5. Press the Enter key.
 The operating screen is displayed. The respective display field dis-
plays the new value.
1
2
3