Rauch QUANTRON-A AXIS-M 20 Q - Axis-M Emc

Attachment and installation
25
3
3.3.2 AXIS-M EMC
Standard schematic connection diagram:
Figure 3.6: Schematic connection diagram QUANTRON-A
[1] Serial interface RS232, 8-pin plug connector
[2] 39-pin machine plug
[3] Option: Drop point adjustment (machines with VariSpread)
[4] M EMC sensors (left, right, centre)
[5] Option: TELIMAT sensor top/bottom
[6] Option: Filling level sensor left/right
[7] Metering slide actuator left/right
[8] Weigh cells left/right
[9] Optional: electrical TELIMAT
[10] Battery
[11] 3-pin plug connector conforming to DIN 9680 / ISO 12369
[12] Option: Y-cable (V24 RS232 interface for storage medium)
[13] 7-pin plug connector conforming to DIN 9684
[14] Option: GPS cable and receiver
1
2
7
5
4
3
10
11
13
14
6
12
9
8