Rauch QUANTRON-A AXIS-M 20 Q - Page 47

Operation QUANTRON-A
41
4
PTO Factory setting: 540 rpm Page 49
Bound. srd. type Selection list:
 Boundary
 Border
Selection with
Arrow keys
Confirmation
with the Enter
key
TELIMAT bor-
der/boundary
Saving the TELIMAT settings for bounda-
ry fertilisation.
For fertiliser
spreaders with
TELIMAT sen-
sor only.
Fertilisation Selection list:
 Normal
 Late
Selection with
Arrow keys
Confirmation
with the Enter
key
Mounting height Input in cm,
Selection list: 0/6, 40/40, 50/50, 60/60,
70/70, 70/76
Selection with
Arrow keys
Confirmation
with the Enter
key
Input distance fac-
tor
Entering the distance factor from the fertil-
iser chart. Required for OptiPoint calcula-
tion
Manufacturer Entering the fertiliser manufacturer.
Composition Percentage content of chemical composi-
tion.
Calculate Opti-
Point
AXIS only
Entering the GPS-Control parameters
Page 50
Turn on distance
(m)
Switch-on distance display. Page 96
Turn off distance
(m)
Switch-off distance display Page 97
GPS control infor-
mation
GPS control parameter information dis-
play.
Page 51
Fertiliser chart Management of fertiliser charts. Page 52
Sub-menu Meaning/possible values Description