Attachment and installation
27
3
Schematic connection diagram: Power supply via ignition lock
Figure 3.8: Schematic connection diagram QUANTRON-A
[1] Serial interface RS232, 8-pin plug connector
[2] 39-pin machine plug
[3] Option: Drop point adjustment (machines with VariSpread)
[4] M EMC sensors (left, right, centre)
[5] Option: TELIMAT sensor top/bottom
[6] Option: Filling level sensor left/right
[7] Metering slide actuator left/right
[8] Weigh cells left/right
[9] Optional: electrical TELIMAT
[10] Battery
[11] 3-pin plug connector conforming to DIN 9680 / ISO 12369
[12] Forward speed sensor
[13] Option: Y-cable (V24 RS232 interface for storage medium)
[14] Option: QUANTRON-A power supply via ignition lock
[15] 7-pin plug connector conforming to DIN 9684
[16] Option: GPS cable and receiver
km/h
km/h
1
10
11
14
12
15
13
16
2
7
5
4
6
9
8
3
To Next Page
Loading...